Many people know very little about lighting until it comes time to purchase or refit lighting in their existing or new space. At this point in time, hopefully people do their own research instead of simply trusting one manufacturer or one employee at a home improvement store. It's incredibly important to research price, cost effectiveness,…
Many people know very little about lighting until it comes time to purchase or refit lighting in their existing or new space. At this point in time, hopefully people do their own research instead of simply trusting one manufacturer or one employee at a home improvement store. It's incredibly important to research price, cost effectiveness, and how much work it will take to maintain a type of light or fixture. LED T8 tubes are relatively new on the scene but are making waves as they maximize their efficiency while minimizing the uptake necessary. LED T8 tubes are the ones usually seen in the large rectangular light fixtures embedded into the ceiling of a classroom, industrial warehouse, and they are even used for walk-in coolers. LEDs are phenomenal for those looking for a light that will cost them less over time, produce better results, and last a lot longer. Nobody likes replacing light bulbs, especially when it requires grabbing a ladder or climbing on counter tops, so why not reduce the chances of needing to do that?
LED T8 tubes are usually compared to fluorescent T8 or fluorescent T5 tubes, and have several benefits over those. All fluorescent lights contain some kind of mercury vapor, and quite often have an argon vapor as well. These vapors are what get excited and produce energy that is absorbed by a phosphorus coating on the inside of the light. The phosphorus coating absorbs and converts the ultraviolet light and produces visible light. There are several problems with all of that previously mentioned. Mercury and argon gases are poisonous, and if the light were to fall and shatter, it could cause a serious problem for those around it – the least of which would be the glass shards littering the ground. In addition to this, fluorescent lights require that ultraviolet light is created before they can give off visible light. Ultraviolet light is a well-known carcinogen, responsible for many skin cancers, such as melanoma. Reducing ultraviolet light in any way possible is a huge benefit. LED T8 tubes use a diode and a semiconductor, which allows the current to flow in only one direction, as well as allow significant control over the color of the light. They do not possess any dangerous gases, and when they fall, they quite often bounce instead of break. LED lights also do not produce ultraviolet light as a byproduct.
A great thing about LED lights, that is large because of how they produce light, is how directional they are. LED T8 tubes typically produce light at a one hundred and twenty degree angle, meaning the light is very targeted and focused. Fluorescent lights, and especially the incandescent lights of yore tend to scatter light instead. This results in a loss of light, and even a weaker light over a certain area. These lights also release a lot of heat per unit of electricity consumed, making them much less efficient and effectively driving up energy bills over time.
Although everyone may have seen a LED light tubes in their lifetime, they may not have realized what they were actually looking at. Light tubes, whether LED or not, are exactly what they sound like. They are composed of a glass or silicon outer shell that houses a lighting structure. They are tubular shaped, and…
Although everyone may have seen a LED light tubes in their lifetime, they may not have realized what they were actually looking at. Light tubes, whether LED or not, are exactly what they sound like. They are composed of a glass or silicon outer shell that houses a lighting structure. They are tubular shaped, and usually mounted in ceilings, behind a glass or plastic shield. They are commonly seen, and most people might recognize them from here, in school buildings or even gymnasiums. Less commonly, light tubes are present in walk-in coolers, offices, warehouses, and even some people are putting them in their homes for the garage or kitchen. LED light tubes are known for producing a better, stronger light more effectively and with less waste. Due to their decreed carbon footprint, LED lights are becoming more common and are available for many more rebates than other kinds of lights.
LED lights are touted to release Seventy percent less carbon monoxide than fluorescent lights, and the difference between LED lights and incandescent lights is said to be even greater. It also does not possess the dangerous mercury and argon gases that are necessary for a fluorescent light to function. For this reason, LED tube lights are beginning to take over the once famous fluorescent tube lights, despite the difference in start up cost. LED lights have proven themselves to be more energy efficient, due to their diode allowing current to flow in only one direction. This means the light is targeted and focused, released at about one hundred hundred and twenty degree angle. This is compared to incandescent and fluorescent lights that scatter it randomly. It also produce much less heat than other forms of lighting, allowing those needing the light to be comfortable in their own space and also preventing the necessity of the air conditioning unit running all day. These factors alone greatly reduce electricity bills and make the investment of LED tube lights more and more worth it. Because of the decrease in carbon monoxide gas, the low amount of electricity wasted as heat, and the fact that they're so recyclable, owners of LED lights are eligible for many more rebates than if their entire building was outfitted with archaic incandescent lights. In some countries that have a carbon tax, this can be incredibly helpful and may even make home owners eligible for a rebate, instead of having to pay taxes at the end of the year!
One LED light tube is usually around sixty to seventy dollars, making them a bit of a hefty investment, especially when considering the fact that a light fixture usually requires two to four of those tubes. However, with the monthly decrease in energy bills, and the rebates available for owning these kinds of lights, it is becoming more and more practical for business and homeowners to make the investment. In addition, LED lights are not just available in tubes anymore and are quite commonly made in standard light bulb shape, meaning they can replace almost any bulb in the house.
There are many factors to consider when choosing lighting for a business or a home, and the first concern to come to most peoples' mind is the issue of price. With the past recession that hit the United States, people became increasingly worried about how they were spending their money and where it was going.…
There are many factors to consider when choosing lighting for a business or a home, and the first concern to come to most peoples' mind is the issue of price. With the past recession that hit the United States, people became increasingly worried about how they were spending their money and where it was going. As a result of this, they also became more aware of what they were spending and started to do more research before following through on a purchase. Cost can be a tricky thing when making the initial investment for lighting, or any kind of home improvement purchase. When considering how much a certain kind of light will cost you, you also have to take into effect how much it will cost over time. This includes the relative energy cost, as well as the maintenance. Different types of light may burn out quicker and cost more as they have to be replaced more often. In addition to that, the lighting may waste more of its energy as heat, not only costing more in energy to produce light, but also increasing the cooling bill in summer.
There are several types of lighting available to the home or business owner: incandescent light bulbs, compact fluorescent light bulbs, and LEDs. LED stands for light emitting diode, and that explains to the way it works as well as the manner in which light is emitted. LEDs and compact fluorescent light bulbs are usually known as the best kinds of lighting to buy for practical purposes. Incandescent was popular years ago, but is slowly being replaced by the former types stated for reasons such as cost, efficiency, and maintenance. LED highbay lights are becoming more common in places like offices and warehouses Due to the fact that they emit so much less heat. LEDs are known to emit twenty-five percent less heat than compact fluorescent lights and a whopping seventy-five percent less heat than incandescent light bulbs. This lack of heat also contributes to the decreased cost of using an LED bulb as opposed to other kinds of lighting. If less energy is lost as heat, the light is being used more efficiently and more money is going towards actually providing light instead of heat. In addition to that, the heat that would be expired due to an incandescent or compact fluorescent light does not heat the room or building and does not increase the cost of cooling or require that an air conditioning unit be run more often.
The most daunting thing about investing in LED lights is the initial costs. LED lights, when compared to other kinds of lights, have a much higher start up cost. However, in the event that someone does invest in LED light bulbs, there are many more rebate opportunities available. Also, the overall cost of maintenance decreases, as LED lights have to be replaced much less often. This is great for businesses that choose to buy LED highbay lights, as they can eliminate that as part of their overhead for a decent period of time.
Lighting is incredibly important for day-to-day life. Adequate lighting is important for a working environment, a cooking environment, and just for simple living. Everybody complains after Daylight Savings Time ends that it's so dark so early and they just can not wait to get to bed – that statement itself should reflect how important lighting…
Lighting is incredibly important for day-to-day life. Adequate lighting is important for a working environment, a cooking environment, and just for simple living. Everybody complains after Daylight Savings Time ends that it's so dark so early and they just can not wait to get to bed – that statement itself should reflect how important lighting is in our lives. There are programs available that will change the tone and intensity of the light on your computer at a certain time during the day to reduce strain on your eyes and get you more ready for bed. Some scientists utilize light cycling to bring an animal into heat, by affecting their photo period. It then makes sense to purchase the best lighting possible and to adequately research your options.
Lights are available in all shapes, colors, sizes, and types. The most well known light is an incandescent bulb, which has changed very little since Thomas Edison invented it back in the 1800s. An incandescent light bulb is made up of a glass housing, molded into its characteristic shape in a process called glass blowing, and a coiled tungsten wire. The coiled tungsten wire is what absorbs the electricity supplied to it, and glows red hot. The energy is then released as heat and light. Fluorescent light bulbs came onto the scene and bought with them a new shape. Fluorescent lights were available in long tubes, commonly seen in high bay lights, embedded into a ceiling, or they were available in the flatted light bulbs now often seen in newly renovated kitchens. Fluorescent light bulbs contained a mercury and argon gas which became excited when electricity flowed through, leading to a release of ultraviolet light which was absorbed by the fluorescent phosphorus coating on the inside of the light, which would then release light in the visible spectrum. Next, LED lights were injected and are quickly becoming popular. LEDs are available as LED tube lights, light bulbs, and flood lights for sport fields. LEDs do not possess dangerous gases like fluorescent lights and they do not release as much heat as an incandescent bulb, making them incredibly efficient.
LED tube lights are great for someone renovating a house, building an office or warehouse building. While LED lights may be more expensive to purchase initially, they quickly pay for themselves. The problem with incandescent light bulbs and compact fluorescent lights is the manner in which they release their energy. Due to how they release their energy, they waste a lot of it as heat. This results in not only a higher electric bill for less light, but also an increased electric bill in order to run a fan or air conditioning unit to keep the room or building cool. In addition to this, LED tube lights bring with them many more utility rebates. This is large because of how green they are, an effect of the reduced amount of carbon monoxide they use, and how efficiently they use the electricity given to them.
Ever since Benjamin Franklin electrocuted himself with his infamous kite, string, and key, the world has been fascinated with electricity, lighting, and how to maximize the efficiency of all of those. Electricity, for most people, comes out of a wall and powers up objects. Electricity costs money, and most people will do anything to reduce…
Ever since Benjamin Franklin electrocuted himself with his infamous kite, string, and key, the world has been fascinated with electricity, lighting, and how to maximize the efficiency of all of those. Electricity, for most people, comes out of a wall and powers up objects. Electricity costs money, and most people will do anything to reduce that bill at the end of the month. There have been many innovations in the world of lighting, and there are a lot of options for both the lighting connoisseur and the novice. Incandescent light bulbs, known for their archaic shape and history tied to Thomas Edison, are still incredibly popular. Compact fluorescent lights were very popular for a wall, but are now making way for another kind of light. It is available in every form and fashion imaginable. LED T8 light tubes are becoming popular in school, LED lights are replacing incandescents in the home and office, and these are even taking over as flood lights on football, soccer, and baseball fields.
The bulbs are extremely efficient due to how they produce light. An LED consist of a diode; thus “light emitting diode”; and a semiconductor. The diode allows current to flow only one way through it, and is thus responsible for the targeting of LED lights, as opposed to the scattering of light produced by incandescent bulbs and fluorescent lights. The semiconductor of an LED determines the color of the light, something that is evident when comparing an LED T8 light tube in the ceiling of a warehouse, to an LED in a remote control. LED lights waste very little light as heat, when compared to other lights. They are known to be seventy-five percent more efficient than incandescent lights and twenty-five percent more efficient than compact fluorescent light bulbs or tubes. This, in turn, will decrease the energy bill of the consumer for a couple of reasons. First, it will use more of the energy towards actually lighting the room or building, resulting in less waste. Also, since less heat is generated, fans and air conditioning units do not have to work as hard to keep the room or building cool. Because of how green LEDs are, they're also eligible for more utility rebates – a little bonus for home and business owners for responsibly reducing their carbon footprint.
Incandescent light bulbs are still a great choice for the home owner only needing one light for a desk lamp or something simply. Incandescent light bulbs are made up of a glass housing and coiled tungsten wire that glows red hot when current is supplied to it. Incandescent lights happen to be the cheapest on the market; they're only a few dollars at a grocery store. Fluorescent light bulbs, if affordable, are usually a better choice than incandescent because they're only slightly more expensive and yet they last longer. Fluorescent light bulbs also produce a better, stronger light.
An LED high bay light is becoming more common in commercial businesses. Businesses are employing these lights for warehouses, freezers, gymnasiums, and offices. Many businesses are making the change from traditional incandescent bulbs or fluorescent lights to the LED (light emitting diode) lights due to their increase in efficiency, and their low energy usage. Although…
An LED high bay light is becoming more common in commercial businesses. Businesses are employing these lights for warehouses, freezers, gymnasiums, and offices. Many businesses are making the change from traditional incandescent bulbs or fluorescent lights to the LED (light emitting diode) lights due to their increase in efficiency, and their low energy usage. Although these are new to the market, compared to their competitors, they are rapidly sweeping it and making moves to capitalize on and monopolize the lighting industry.
LED lights are different from conventional lighting in many ways, and the first and most obvious way in which they are different comes from the name: light emitting diode. Obviously all kind of lighting puts off some kind of light, otherwise it would be absolutely useless, but the difference between LEDs is that they're capable of throwing off light in one targeted direction. This is as compared to traditional lighting which scatters, and results in a loss of energy overall. Due to the fact that LEDs are able to target their light, they tend to use seventy-five percent less energy than typical incandescent bulbs, and twenty-five percent less than compact fluorescent lighting. In addition to this, LEDs give off less heat while remaining lit while incandescent light bulbs will release ninety percent of their energy as heat and compact fluorescent light bulbs.
An LED high bay light is the one commonly seen in large buildings, where they're placed in the roof and resemble big, long rectangles. They are usually seen in the roofs of gymnasiums and warehouses, where large scale lighting is required, without giving off much heat. Obviously, it is important to not have a buildup of heat in these kinds of settings, otherwise it would become unbearable for workers and clients. This is the reason that an LED high bay light would be preferred in this kind of setting – due to the low amount of energy it gives off as heat.
Although LED lights are typically thought as the large ones, illuminating entire buildings, embedded in the rooftops, they are now becoming more mainstream. Kitchen lights, desk lamps, and even flash lights are becoming fitted with LEDs. LED lights were previously only available in a high bay fashion, as something that had to be placed inside a roof, but they are now coming in all shapes and sizes, and are being used to phase out other types of lighting.
The immediate concern with LED lighting is the fact that it has a higher initial cost than all other forms of lighting, and can be daunting for anyone setting it up. This is compounded when business or home owners need to purchase several light fixtures. Fortunately, this is made easier by the fact that not only do it has an extra amount of rebates available to them but they also result in lower maintenance and upkeep fees as well as a reduced energy bill due to the reduction in energy that they utilize as compared to traditional lighting.
When choosing lighting for any kind of setting, whether it's for the home or for the business, its exceedingly important to not only choose the right lighting but get it from the right place. When considering lighting, it could be argued that LED lighting is the best, meaning it's very important to choose the best…
When choosing lighting for any kind of setting, whether it's for the home or for the business, its exceedingly important to not only choose the right lighting but get it from the right place. When considering lighting, it could be argued that LED lighting is the best, meaning it's very important to choose the best manufacturer. High bay lights are those commonly found in the roofs of large buildings like schools, warehouses, or offices, although some people do have them in their homes sometimes in rooms like kitchens or Florida rooms. These are commonly the large rectangular lights found embedded in roofs of such buildings. They provide a lot and due to their recent installation of LED lights, as opposed to compact fluorescent or incandescent, they're incredibly efficient.
LED lights, meaning light emitting diodes, are much more energy efficient than other traditional, largely due to the nature by which they conduct electricity and utilize energy. It contain a diode and a semiconductor. The diode ensures that current flows only one way, and the semiconductor is what is responsible for the color of the light, making it easy for LEDs to be available in many different colors. Due to the components of the LED, it ends up releasing a lot less of its energy as heat, and more of it as light. Incandescent lights are known for being very inefficient, which contributes to their lack of rebates compared to other lighting. It release ninety percent of their energy as heat, not only driving up electricity bills, but increasing the toll on the air conditioning unit as it saves to keep the room, house, or building cool.
Finding a good manufacturer for any kind of lighting or product is important, but an LED high bay light manufacturer should be able to educate in the ways in which LED lights differ from other traditional lighting and why you would choose one over the other. Compact fluorescent lights, being twenty-five percent less efficient than LEDs, use mercury and argon vapors to conduct electricity and become excited, releasing ultraviolet light. This is absorbed by a fluorescent coating on the tube enclosing them, which then emits visible light. Due to the nature of the different materials absorbing different light, compact fluorescent lights are still less efficient than LEDs. Incandescent lights are the most primitive of the three, composed of a glass housing holding a coiled tungsten wire. The coiled tungsten wire heaters up enough until it can release energy as light and heat. Because the incandescent light derives its energy solely from heat, a lot of its energy is actually lost as heat. These are about seventy-five percent more efficient than incandescent lights. For this reason, LED lights are great investment for any home owner or entrepreneur.
It has been proven time and time again, by many scientists, that lighting is an important factor in our health and wellbeing. Proper lighting can affect our mood, our sexual function, and it can even affect how quickly we can learn and absorb information. It's been theorized that lighting can actually affect a woman's estrus…
It has been proven time and time again, by many scientists, that lighting is an important factor in our health and wellbeing. Proper lighting can affect our mood, our sexual function, and it can even affect how quickly we can learn and absorb information. It's been theorized that lighting can actually affect a woman's estrus cycle and affect whether she ovulates or gets pregnant at a certain time of year. It makes sense, then, that it is important to research the kind of lighting you'll be purchasing for a home or business and it makes even more sense to want the best. LED high bay lamps are rapidly emerging as the best on the market due to their low upkeep, low cost of maintenance, and incredibly high efficiency. LED lights, previously only used in remote controls and computers, are becoming ever present in office settings, warehouses, and even homes. Traditional lighting, such as incandescent and compact fluorescent bulbs are quickly becoming a thing of the past and will be phased out by LED lights.
LED stands for “light emitting diode,” and those three words directly state what an LED light is and what it does. In an LED light, a diode is used. A diode is a structure that allows energy to flow in only one direction. When electricity flows to the diode, it excites the electrons in the LEDs semiconductor, until they elevate to the next level. The atoms then have too much energy and have to get rid of it. They do this by releasing their energy in the form of light. Conventional incandescent lighting produces light by heating a coiled tungsten tube, encased in a glass housing, until it becomes hot enough to give off light. Because this light is based off heat energy, it makes sense that ninety percent of its energy is lost as heat, utilizing only ten percent to light a room. The great thing about LED high bay lamps is also that it's very easy to manipulate the color they give off. The color of an LED light is affected by energy band gap of the semiconductor.
LED lights are known to be advantageous of other light sources, and the aspect that draws most people to them is that they are for so long. This is an incredible advantage, especially considering the usual deterrent to LED lights: the initial set up price. While LED lights are more expensive to place and set up than incandescent or fluorescent, they're a better life long investment due to the multitude of rebates available for them as well as the fact that energy costs in the home or business will decrease due to their more efficient use of energy.
Although LED lights were previously only available as giant flood lights or what would be placed in the roof of a warehouse to illuminate a giant building, they're becoming more easily available in shapes and sizes that would be attractive to a home owner. As a result, conventional lighting is disappearing from houses, especially in areas such as the kitchen and home office.
Flood lights are usually depicted in movies as something ominous. They catch people doing something suspicious, or something they're not supposed to do, and they always turn on at the most inopportune moments. Luckily for consumers, floodlights are not just to catch the bad guys! Flood lights are commonly found in peoples' back yards, and…
Flood lights are usually depicted in movies as something ominous. They catch people doing something suspicious, or something they're not supposed to do, and they always turn on at the most inopportune moments. Luckily for consumers, floodlights are not just to catch the bad guys! Flood lights are commonly found in peoples' back yards, and run off an automatic sensor to turn on whenever someone enters the back yard.
They're extremely bright and tend to light up the entire back yard, which is great for people who want to let their dogs out in the middle of the night, or those who might hear something alarming. Flood lights are also often seen on sports fields, usually at several points along the field with multiple lights adhering to one fixture.
The most common and well-known flood light is a metal halide, which is the bright white one most people may be familiar with. Next common is a sodium flood which gives off an orange light, rather than bright white. The sodium flood lights are more akin to street lamps. They're extremely cost effective due to their high lumens-to-watt ratio. With recent technology advocating, LED flood lights are becoming more popular. This is due to their incredible efficiency, and the fact that they are even cheaper than sodium flood lights, long term. The initial cost is greater, but any kind of LED light is automatically eligible for more utility rebates and end up consuming less energy over time.
When using flood lights, it's very important to get the best bang for your buck, as well as making sure they're quite performing the job they're supposed to. LED lights are a great innovation because of the way they consume energy and release it as light. LED lights are known to be seventy-five percent more efficient than incandescent light bulbs and twenty-five percent more efficient than compact fluorescent light bulbs. While LED light bulbs cost more initially, they wind up being much cheaper in the long run.
This is due to a couple factors: many rebates are available for LED lights because of how much greener they are other than forms of lighting; LED lights also waste less energy, and more of what they consume is released as light instead of wasted as heat. Incandescent light bulbs waste ninety percent of their energy as heat. This also allows LED flood lamps to target their light, instead of scattering it over a wide area like other forms of light. This makes it much easier to purchase and set up an LED light and be able to predict what will actually be lit.
LED lights were typically known as those present in remote controls, cell phones, and alarm clocks. However, with recent research and invention, LED lights are becoming more available in different shapes and even colors. This is what is making LED flood lights more common in sporting events, in addition to the fact that they drastically reduce electricity bills as well as increase the comfort of spectators since they release less heat.
There are many different kinds of lighting available: LED, incandescent, and compact fluorescent lighting are common and well-known lighting choices. LED is probably the most recent to have arrived on the scene, while incandescent is the oldest. As with any technology, some people will balk at change and want to keep with the tried and…
There are many different kinds of lighting available: LED, incandescent, and compact fluorescent lighting are common and well-known lighting choices. LED is probably the most recent to have arrived on the scene, while incandescent is the oldest. As with any technology, some people will balk at change and want to keep with the tried and true, like incandescent. Unfortunately for those people, newer technology quite often equates with the word “better” and that is certainly true for LED lights as compared to incandescent.
LED lights are known for being more energy efficient, having more utility rebates available, and having a lower degree of maintenance associated with them. When compared to incandescent, or even compact fluorescent lights, the start up cost is much higher, often deterring first time buyers, as they are often unaware of the savings that can be accrued with these lights. This is compounded by those wishing to purchase LED flood lamps, as such a big light will unduly cost more and someone investing in LED flood lamps is likely the kind of person that is buying multiple lights at a time. This would make the cost even more daunting.
The reason that LED, or light emitting diode, lights save so much money in the long run has to do with how they conduct electricity and how they produce light. Standard incandescent bulbs are the stereotypical light bulbs, made out of a glass case, with a coiled tungsten wire inside. This tungsten wire is what the current flows through, and the energy it releases is the light. Unfortunately, this kind of lighting also releases a lot of its energy as heat, wasting almost ninety percent of it. LED lights are seventy-five percent more efficient than incandescent lights.
LED lights consist of a diode which allows current to flow in only one direction, effectively targeting the energy and light that is released. LED lights also have a semiconductor chip, which controls the color of the light.
Although LEDs were commonly thought to only be present in cell phones and remote controls, they're becoming more common due to their variance in size, shape, and color – allowing them to be used as LED flood lamps as well! Compact fluorescent bulbs use vapors such as mercury and argon to conduct electricity. When these vapors are excited, they give off ultraviolet light, which is absorbed by the fluorescent coating of the housing of the light and released light in the visible spectrum. Compact fluorescent lights are easily picked out of a crowd by their characteristic spiral shape.
LED lights have much more utility rebates available to them, for the sheer fact that they're greener than other forms of light. LED flood lamps are easier to use in a huge warehouse or office because they more efficiently use the electricity they're consuming, releasing a large proportion of it as visible light and wasting very little as heat. This also prevails the air conditioning from having to run all day, to cool a room or building already hot from many working bodies.
There are three kinds of lighting commonly employed in most buildings: incandescent lighting, compact fluorescent lights, and LED lights. Incandescent lighting is the oldest of the three and, at this point, the most commonly used. Compact fluorescent arrived on the scene after that, with many improvements and they proved to be much more efficient than…
There are three kinds of lighting commonly employed in most buildings: incandescent lighting, compact fluorescent lights, and LED lights. Incandescent lighting is the oldest of the three and, at this point, the most commonly used. Compact fluorescent arrived on the scene after that, with many improvements and they proved to be much more efficient than incandescent light bulbs. LED lights, or light emitting diodes, were next and blew incandescent and compact fluorescent lighting out of the water. All three differ in how they utilize electricity and direct current, how much they cost, and how much maintenance they require. Whether purchasing a commercial LED flood light or one simple incandescent bulb for a desk lamp, it's important to know what you're purchasing and what it entails.
Incandescent light bulbs have not changed much since Thomas Edison invented the light bulb. They consist of a simple glass shape, usually molded while hot in a process called glass blowing, and have a coil of tungsten wire on the inside. That tungsten wire absorbs electricity when the switch is turned on, closing the circuit. The wire glows red hot, and releases energy as both heat and light. Because of the manner in which current is used in an incandescent light bulb, as well as its archaic nature, they happen to be incredibly inefficient. Incandescent light bulbs release about ninety percent of their energy as heat, using only ten percent of it as visible light. As a result, it also burn out more frequently and must be replaced more often.
Compact fluorescent lights are composed of a mixture of argon and mercury vapors, housed in a spiral shaped pipe, coated on the inside with fluorescent coating. When the vapors are energized, their atoms get excited and jump to the next level. This causes a release of ultraviolet radiation, which is then absorbed by the fluorescent coating. That fluorescent coating connects the ultraviolet light to visible light, which can then be used to light an entire room or building! Fluorescent lights are more efficient, and give off less heat than incandescent lights, but they are not inherently perfect.
LED lights, as their name suggests, consist of a diode and a semiconductor that emits light. The diode allows current to travel in only one direction, and the semiconductor determines the color of the light that is released. Due to the nature by which it use the electricity sent to them, they tend to be seventy-five percent more efficient than incandescent light bulbs and twenty-five percent more efficient than compact fluorescent bulbs. This also results in LED lights reflecting a lot longer than other types of lighting for the sheer fact that they do not “burn out” as often.
Although the initial cost of it is a hard pill to swallow, especially compared to incandescent lights being only a few dollars at a grocery store, they wind up being much cheaper over time. Rebates are available for LED lights, while none are available for incandescents and just a few for compact fluorescents. Also, the fact that they use energy more efficiently will significantly decrease bills, even when purchasing an commercial LED flood light.
Sweeping the industry of lighting are a reliably new invention: LED bay lights. Everyone has seen LED bay lights before, although they may not have been aware of it. These are commonly seen in warehouses, storage centers, and even offices. One of the most enticing things about these lights, as compared to other lighting such…
Sweeping the industry of lighting are a reliably new invention: LED bay lights. Everyone has seen LED bay lights before, although they may not have been aware of it. These are commonly seen in warehouses, storage centers, and even offices. One of the most enticing things about these lights, as compared to other lighting such as incandescent or compact fluorescent, is the low amount of heat they put off. The heat released by a light fixture, or light bulb, is incredibly important in a business setting when it comes to consider the comfort of workers which should directly increase their output.
LED stands for “light emitting diode” and refers to the components of the light as well as what it does. An LED light consists of a diode and semiconductor. The diode is a material that allows the current to flow in only one direction, and the semiconductor is what determines the color of the LED light. When electricity passes over the diode, the atoms in the semiconductor chip are excited to a higher level and must release that excess energy.
That energy is released as light. This is very different from traditional incandescent bulbs which are made of a glass that is blown into molds when it's hot and has a tungsten coil placed inside of it. That tungsten coil is what heats up, and then gives off light. Due to the different processes which generate light, the incandescent bulbs release ninety percent of their energy as heat and only about ten percent as light. LED bay lights are about seventy-five percent more efficient than an incandescent bulb. In comparison to these two, compact fluorescent lights employ another method than those previously mentioned. The compact fluorescent lights contain mercury and argon in a spiral-shaped tube. When turned on, an electric current will pass through the mercury and argon vapors, exciting the atoms and producing an ultraviolet light. This ultraviolet light stimulates a fluorescent coating on the inside of the bulb, which causes it to emit visible light. Again, a lot of energy is released as heat, making LED lights about twenty-five percent more efficient than compact fluorescent lights.
The most daunting part of investing in LED lights, especially when creating a blueprint for an absolutely new building is the startup cost. While it may be easy enough to replace one at a time, that is not what people are usually doing or considering. While it may be expensive to set off, they end up saving users money in the long term.
More rebates are available for LED lights, compared to other forms of lighting, and their high efficiency decrees energy bills over time. In addition to the immediately evident decrease in the electricity bill, there would also be a decrease in the cost of the air conditioning bill considering the fact that LED bay lights are less likely to raise the temperature of a room or building, like other lighting would .
It could be argued that light emitting diode (LED) lighting is the best out of all the current options, and it can be charged that out of all the LED lights, a commercial LED high bay light is the best. When saying that one is “the best,” it's helpful to know what it's being compared…
It could be argued that light emitting diode (LED) lighting is the best out of all the current options, and it can be charged that out of all the LED lights, a commercial LED high bay light is the best. When saying that one is “the best,” it's helpful to know what it's being compared to. Most traditional lighting is incandescent or fluorescent, although there is also induction and high intensity discharge lighting. All different kinds of lighting vary based on their longevity, quality of the light, maintenance, cost, efficiency, and whether or not any rebate offers are available for using them. The life of it is significantly higher than any of the options, with incandescent lighting having the shortest life span. In addition to that, the quality of LED lighting is much better than most of the other lighting choices commercially available and its energy efficiency is very high. Unfortunately, there is always a trade off when there's an excellent product. It happens to be one of the more expensive choices, although some could argue that the initial cost is offset by the great availability of utility rebates and their low maintenance costs.
LED lights are quickly phasing out other forms of lighting, being used commercially as well as in the home. LED lights, previously only available in home improvement stores, are now being placed in grocery stores and places like Target. It is becoming very easy for businesses to acquire a commercial LED high bay light. However, some people are still confused as to how LED lights actually work. LED, standing for “light emitting diode,” implying that there is a diode present that is emitting light. That diode has two terminals which conduct electricity in just one direction. Diodes have been used, for years, in technology such as remote controls and cell phones. LEDs are capable of producing a wide variety and spectrum of colors; the color is dependent on the energy gap in the semiconductor of the diode. This makes LEDs all the more useful, as they can come in multiple different colors.
How LEDs use energy can relate to how much more efficient and useful they are compared to other conventional lighting. LEDs have been noted to use seventy-five percent less energy than incandescent light bulbs, and twenty-five percent less than the other extremely effective lighting: compact fluorescent. In addition to that, LEDs are much more efficient at lighting a room due to how they emit light. LEDs are capable of emitting light in one targeted direction, as compared to incandescent and compact fluorescent lighting which scatters the light. Also, LEDs put out a lot less heat than other lighting, resulting in less loss of energy. Incandescents release ninety percent of their energy as heat. This can be extremely useful commercially, as a room can become extremely hot due to lighting. A commercial LED high bay light can help prevent that.
The market is flooded with a variety of lighting options, but the ones which have recently gained great popularity are the LEDs that are Light Emitting Diodes. LEDs are simple inventions in the lighting industry but with great potential. LEDs are the future of the lighting industry. With an increasing need to safeguard our natural…
The market is flooded with a variety of lighting options, but the ones which have recently gained great popularity are the LEDs that are Light Emitting Diodes. LEDs are simple inventions in the lighting industry but with great potential. LEDs are the future of the lighting industry. With an increasing need to safeguard our natural resources, it has become our prime duty to start contributing to the global shift. LEDs have been known as more energy efficient alternatives to the traditional lighting systems and are far more controllable and visually appealing than compact fluorescent bulbs. LED lights are also cool to the touch and do not contribute to increasing in temperature in your house.
Another spike in the performance and overall appeal has been made by the introduction of smart lighting solutions that allow lights to be app controlled. This opens a whole range of opportunities for you to control as well as beautify your space with lights.
As these smart LED bulbs are way more expensive than incandescent bulbs or halogens, using them in the interior design of your home is often overlooked or avoided. These smart LED lamps despite in there evolving phase, have various long-term benefits to offer which may justify the extra cost:
- Visual Treat: The smart LED lights when placed at the right place, with a right Color temperature range, make your space a visual treat. The magnificent colors, the range of lights and various shades create a great effect together. You can even choose color schemes to suit your mood or theme of the occasion. Your choice of LED lighting for home can be lots of fun only if you choose to invest in the lighting solutions of tomorrow.
- Lifespan: Smart LED lights tend to have a longer lifespan when compared to other traditional sources. They last almost as much as 25 times longer than incandescent bulbs.
- Energy Saver: LED lights are the smart combination of technology that helps save energy to a great extent. They burn almost 75 per cent less energy compared to incandescent. This is one such property which makes these smart LED lights future of the lighting systems.
- Expensive yet cost-effective: As the technology is still in its initial cells, the comparative usage of smart LED bulbs is a costair. But running for a longer lifespan and saving more energy makes up for the initial investment.
- Shapes and Sizes: The smart LED bulbs are made up of crystals and not gas or a vacuum, it can take any shape and sizes. They come in various formats and sizes like tubes, pots, panels, strings etc. The most popular one is the way they are used in the form of flexible strips which are used to illuminate the edges, corners or circled around any object.
- Easy installation and outreach to dark distant corners: The smart LED lights being thin and flexible can reach many such places where normal traditional bulbs can not reach, like drawers, cabinets. This very property makes them extremely useful, as they help and shed some light under your bed or at the back of your fridge, where it would have been difficult to place any light otherwise.
- Color Temperature range: Color Temperature Range offers a wide scope of selection and control over your interior design. It basically reflects to the coolness or warmth of light. The LED lights can easily emulate daylight, or be a cool white, or a warm white or various other temperature settings. This Color temperature range helps in setting the warmth and overall feel of the space. They come in every color from ultra-violet and deep blues to warm reds and luscious greens. Adding them not only changes the color of your space but also the temperature.
- Control Gear: you can easily set up for a control gear system that is remote technology to easily operate these smart LED lights of your entire space with the help of a remote, making it smart in every sense.
By using the above-mentioned properties, the smart LED bulbs work great for those who wish to change the overall look of their interiors. These lights if placed correctly, illuminate and add extra features to your space by completely incorporating into it and offering you full control.
Care needs to be taken while opting for the lights too, depending upon the space you will be using it like your living room, bedroom, kitchen or any other space. Every space has its own set of requirements and additional features. For Ex: a living room being such a place you get maximum visitors, should have an ambient light environment. But you can always surprise your visitors by creating beautiful designs and fascinating ceiling lights. By this, you are meeting your requirement of light along with great designs and beautiful features.
As more and more people are becoming conscious about conservation of the environment, one such huge leap can be made by way of switching to use environment-friendly energy and gadgets. LEDs (Light Emission Diodes) are one such invention with great potential that will completely change our light industry in a positive and fruitful manner. Making…
As more and more people are becoming conscious about conservation of the environment, one such huge leap can be made by way of switching to use environment-friendly energy and gadgets. LEDs (Light Emission Diodes) are one such invention with great potential that will completely change our light industry in a positive and fruitful manner. Making a switch to smart LEDs lights is the easiest way of taking our first step towards going green and saving our money too.
Some of the most predominant environmental benefits of using smart LEDs are:
- Low energy consumption: The smart LED lights consume between 60 to 80 percent less electricity / energy than the traditional incandescent, fluorescent and halogen options resulting in more illumination at very low energy spend.
Smart LED lights can also be app controlled to be turned off when not in use and dimmed or brightened based on time of day and amount of natural light available.
This is easily reflected in your electricity bill. Also, the bill is just a small part of it, the larger picture benefits greatly from the energy savings. Just imagine if everyone makes the switch, how much can the world save on the whole.
- Low Carbon Emission: One of the largest contributors to the carbon emissions in the environment is the home lighting systems. This impact can be completely negated by switching to use smart LED lights, which emit almost negligible carbon into the atmosphere. The incandescent bulbs create as much as 4,500 lbs. of CO2 per year and CFLs create a little less 1,051 lbs. of carbon emissions per year whereas the smart LED lights only create 451 lbs. of CO2 per year. The difference is vast in nature. It was found in a study, that replacing only one light bulb in every house with an LED bulb would reduce greenhouse gas emissions by 9 billion pounds.
- Chemical free disposal: The smart LED lights are not only eco-friendly as far as usage is concerned, but also when it comes to disposal of the bulb. The LED lights do not emit any nuclear or Sulfur dioxide waste and neither do they contain any toxic mercury like the fluorescent bulbs, therefore, their disposal has no impact on landfill. Disposal of LEDs is safer on the environment.
- Cold Temperature Operation: LEDs love to remain cool, unlike its other counterparts which tend to heat up on consumption of energy. For the same reason, these smart LEDs do not release any heat into the environment and contribute to curbing global warming. No extra energy is wasted in the heating process.
- No emission of Ultra-Violet rays: Unlike other traditional lamps, these smart LED lamps do not emit any Ultraviolet rays. This makes it a healthier as well as safer source of lighting. They do not produce any infra-red lights, making them suitable for use in places where there are highly heat sensitive materials.
While you may ask that the normal LED bulbs come with the same set of attributes and what is the point of investing in smart LEDs? Smart LED bulbs come with a control system, which gives you an option of either turning in off when not in use with the help of a timer or to make it dim when you do not need full light. So, you will not be wasting any extra energy when not required. They can also be used in conjunction with motion sensors for outdoor lighting so they turn on or off only when someone walks through. This ensures availability of light when required and saving when not.
These LEDs are eco-friendly and hence can easily be made use by as many organizations, schools, hospitals etc. The only concern why this has not been achieved yet is the expensive price tag that may be intimidating at the outside.
Only if we look at this price as an investment, as one LED lasts way longer than the traditional bulbs, we would be able to make the switch towards a safer environment.
A simple switch to safeguard our future. The whole world is under this global shift towards adopting more and more sustainable means for the healthier future. Big organizations like Canon, CSC IT services etc. follow principles of sustainability where they have already made remarkable changes for achieving sustainability in their organization, which will overall contribute towards better and healthier environment. Just something as simple as switching one light bulb can have a huge environmental impact. All we need to do is to make a switch towards better future by embracing LEDs in our daily lives.